Description
Crystal Water pH Increase (1kg) – pH Balancer
Achieve the perfect water balance with Crystal Water pH Increase. When spa water becomes too acidic (low pH), it can lead to itchy skin, stinging eyes, and costly corrosion of your spa’s heater and pumps.
Crystal Water pH Increase is a high-purity alkaline mineral designed to safely and effectively raise your pH levels into the "ideal zone," ensuring your sanitiser works at peak efficiency and your soak is as comfortable as possible.
Why You Need pH Increase:
-
Stops Eye & Skin Irritation: Prevents the "burning" sensation caused by acidic water, making it safe for the whole family.
-
Protects Equipment: Neutralises acidic water before it can etch surfaces or corrode expensive internal metal components like your heater element.
-
Maximises Sanitiser Life: Chlorine and Bromine work most effectively when pH is balanced; using this product prevents your sanitiser from "burning off" too quickly.
-
Odour Control: Helps prevent the formation of irritating chloramines that cause "chemical" smells.
Specifications:
| Feature | Details |
| Product Type | pH Increaser (pH Up) |
| Weight | 1kg |
| Active Ingredient | Sodium Carbonate (Soda Ash) |
| Compatibility | Safe for all spa finishes and sanitising systems |
How to Use
-
Test your spa water using a reliable test strip or kit.
-
The ideal pH range is 7.2 – 7.6.
-
If pH is below 7.2, add the required dose (typically 10g per 1,000L to raise pH by 0.1) while the pump is running.
-
Allow the water to circulate for at least 30–60 minutes before re-testing.
The Golden Rule: Always check your Total Alkalinity first. If your Alkalinity is low, your pH will be unstable. Use Crystal Water Buffer to set your Alkalinity, then use pH Increase for fine-tuning your pH levels.
- Weight:
- 1.00 KGS
- Width:
- 10.00 (cm)
- Height:
- 18.00 (cm)
- Depth:
- 10.00 (cm)
