Crystal Water Pipe Cleaner 500ml

Crystal Water Pipe Cleaner (500ml) – Deep Clean Degreaser

Keep your spa’s internal plumbing as clean as the water you soak in with Crystal Water Pipe Cleaner. Over time, the hidden pipes and jets of your spa accumulate a buildup of body oils, soaps, lotions, and "biofilm"—a slimy coating that harbours bacteria and reduces the effectiveness of your sanitiser.

Designed for use just before you drain your spa, this powerful degreasing formula flushes out hidden debris, ensuring your fresh fill stays cleaner and clearer for longer.

Why Use a Pipe Cleaner?

• Removes Biofilm & Scale: Breaks down the stubborn organic layers inside the plumbing that regular chlorine can’t reach.

• Improves Jet Performance: Clears away buildup that can restrict water flow, ensuring your massage jets perform at their peak.

• Cleaner Water, Faster: By removing the "gunk" in the pipes, your new water won't be immediately contaminated by old waste, meaning you'll use fewer chemicals.

• Eliminates Odours: Targets the source of "musty" spa smells often trapped deep within the internal pipework.

Specifications:

How to Use

1. Remove the Filter: Take out your filter cartridge(s) before starting the cleaning process.

2. Add the Cleaner: Pour the required dose (refer to the bottle for your spa's volume) directly into the spa water.

3. Run the Jets: Turn the pumps and jets on high for 20–30 minutes to allow the solution to circulate through all internal plumbing. (Note: You may see some foam or debris enter the spa—this means it’s working!)

4. Drain & Rinse: Drain the spa as per your usual routine. Rinse the spa shell thoroughly with fresh water to remove any loosened debris before refilling.

The Fresh Start Rule: You wouldn't take a bath in a dirty tub—don't refill your spa without cleaning the pipes! Using Crystal Water Pipe Cleaner every time you change your water (typically every 3 months) is the best way to guarantee a truly hygienic spa experience.